Listing for all primes seeking assistance with project 02-1H4404. 5 results found.
Contractor: Stimpel-Wiebelhaus Associates, Inc Contact: Marshall Harmon
Address: 1168 Industrial St. Redding, CA, 96002
Phone: 530-356-4454 Fax: 530-223-3879 Email: marshall@stimpel.net
Services needed: We are seeking quotes from qualified DBE subcontractors and suppliers for the following items: LEAD COMPLIANCE PLAN, DEVELOP WATER SUPPLy, CONSTRUCTION AREA SIGNS, TRAFFIC CONTROL SYSTEM, PORTABLE CHANGEABLE MESSAGE SIGN (LS), JOB SITE MANAGEMENT, PREPARE STORM WATER POLLUTION PREVENTION PLAN, RAIN EVENT ACTION PLAN, STORM WATER SAMPLING AND ANALYSIS DAY, STORM WATER ANNUAL REPORT, MOVE-IN/MOVE-OUT (TEMPORARY EROSION CONTROL), TEMPORARY TACKED STRAW, TEMPORARY CHECK DAM, TEMPORARY DRAINAGE INLET PROTECTION, TEMPORARY FIBER ROLL, TEMPORARY SILT FENCE, TEMPORARY CONSTRUCTION ENTRANCE, STREET SWEEPING, TEMPORARY CONCRETE WASHOUT, TREATED WOOD WASTE, CLEARING AND GRUBBING (LS), DUST PALLIATIVE, ROADWAY EXCAVATION, SHOULDER BACKING, WOOD MULCH, ROLLED EROSION CONTROL PRODUCT (NETTING), HYDROSEED, FINISHING ROADWAY, CLASS 2 AGGREGATE BASE (CY), HOT MIX ASPHALT (TYPE A), DATA CORE, PLACE HOT MIX ASPHALT DIKE (TYPE D), TACK COAT, COLD PLANE ASPHALT CONCRETE PAVEMENT, STRUCTURAL CONCRETE, HEADWALL, STRUCTURAL CONCRETE, DRAINAGE INLET, 24" CORRUGATED STEEL PIPE (.109" THICK), 42" CORRUGATED STEEL PIPE (.109" THICK), 48" CORRUGATED STEEL PIPE (.138" THICK), 24" STEEL FLARED END SECTION, REMOVE CULVERT (LF), REMOVE HEADWALL, ROCK SLOPE PROTECTION (150 LB, CLASS III, METHOD B) (CY), ROCK SLOPE PROTECTION (20 LB, CLASS I, METHOD B), ROCK SLOPE PROTECTION FABRIC (CLASS 8), MISCELLANEOUS IRON AND STEEL, METAL CATTLE GUARD, REMOVE CATTLE GUARD, FENCE (TYPE BW, METAL POST), DELINEATOR (CLASS 2), PAVEMENT MARKER (RETROREFLECTIVE-RECESSED), MILEPOST MARKER, MARKER (CULVERT), OBJECT MARKER (TYPE L-1), REMOVE ROADSIDE SIGN, FURNISH SINGLE SHEET ALUMINUM SIGN (0.063"-UNFRAMED)FOR RETROREFLECTIVE SHEETING(TYPE XI), ROADSIDE SIGN - ONE POST, RETROREFLECTIVE SHEETING (TYPE XI), CABLE RAILING, THERMOPLASTIC PAVEMENT MARKING, THERMOPLASTIC TRAFFIC STRIPE (SPRAYABLE), MOBILIZATION
Requirements: STIMPEL-WIEBELHAUS ASSOCIATES, INC. (SWA) WILL WORK WITH INTERESTED SUBCONTRACTORS TO IDENTIFY OPPORTUNITIES TO BREAK DOWN ITEMS INTO ECONOMICALLY FEASIBLE PACKAGES TO ENCOURAGE MINORITY CONTRACTOR PARTICIPATION. SWA IS A UNION SIGNATORY CONTRACTOR AND SUBS SHALL BE REQUIRED TO BE OR TO SIGN AN APPROVED ONE TIME TERMS/CONDITIONS AGREEMENT PLANS AND SPECIFICATIONS ARE AVAILABLE FOR VIEWING AT OUR OFFICE OR CAN BE DOWNLOADED FROM THE OWNERS WEBSITE. PLEASE CONTACT SWA FOR ANY FUTHER ASSISTANCE AND IF ANY HELP IS NEEDDED IN OBTAINING BONDING, INSURANCE, EQUIPMENT, MATERIALS, OR SUPPLIES SWA INTENDS TO WORK COOPERATIVELY WITH ALL QUALIFIED FIRMS SEEKING TO WORK ON THIS PROJECT. WE ARE AN EQUAL OPPORTUNITY EMPLOYER AND WILL CONSIDER ANY AND ALL BIDS THAT MAY BE SUBMITTED.
Date posted: 08/02/2018
Contractor: Steelhead Constructors, Inc. Contact: Kelly Knight
Address: 2940 Innsbruck Drive, Redding, CA 96003
Phone: 530-226-6400 Fax: 530-226-6401 Email: kelly@steelheadconstructors.com
Services needed: We are requesting quotes from all qualified subcontractors and suppliers, including all certified DVBE/DBE/MBE/WBE/MB subcontractors. We are soliciting quotes for (including but not limited to): Wood Mulch, Rolled Erosion Control Product (Netting), Hydroseed, Hot Mix Asphalt (Type A), Data Core, Tack Coat, Thermoplastic Pavement Marking, Thermoplastic Traffic Stripe (Sprayable). The quotations may be broken down into comparable units as reasonably necessary. Steelhead will work with suppliers and subcontractors to identify opportunities and break down items into economically feasible units.
Requirements: Steelhead is an Equal Employment Opportunity Employer. We encourage and actively solicit proposals from DVBE, DBE, MBE, WBE, DBE and MB subcontractors and suppliers on all our projects. All qualified DVBE, DBE, MBE, WBE, and MB subcontractors must be registered and certified by the California Department of Transportation. Steelhead is signatory to Operating Engineers, Laborers, Carpenters and Cement Masons Unions. All subcontractors must possess a current contractor?s license, insurance, and workers? compensation coverage meeting Steelhead?s requirements and will be required to sign Steelhead?s Subcontract Agreement. Performance and payment bonds up to 100% may be required for the full amount of the subcontract price. Prior to the bid, upon request, you can contact our office if you require assistance in bonding, lines of credit, insurance, obtaining necessary equipment, supplies, materials or services, establishing delivery schedules, etc., which may be required by the Owner. Please contact our office and advise us if you are interested in this project. When submitting any bid on a public works project, please prominently include, on your quote, your California Contractors License Number and Department of Industrial Relations Number. More information regarding California Contractors License and DIR Numbers can be found at http://www.cslb.ca.gov/
Date posted: 08/03/2018
Contractor: Knife River Construction Contact: Marc Madsen
Address: 1764 Skyway Chico, CA 95928
Phone: 530-891-6555 Fax: 530-894-6220 Email: marc.madsen@kniferiver.com
Services needed: Knife River Construction is requesting quotes from all qualified subcontractors and suppliers including certified DBE firms for the following items of work, including but not limited to: LEAD COMPLIANCE PLAN, DEVELOP WATER SUPPLY, CONSTRUCTION AREA SIGNS, TRAFFIC CONTROL SYSTEM, PORTABLE CHANGEABLE MESSAGE SIGN, JOB SITE MANAGEMENT, PREPARE STORM WATER POLLUTION PREVENTION PLAN, RAIN EVENT ACTION PLAN, STORM WATER SAMPLING AND ANALYSIS DAY, STORM WATER ANNUAL REPORT, MOVE-IN/MOVE-OUT (TEMPORARY EROSION CONTROL), TEMPORARY TACKED STRAW, TEMPORARY CHECK DAM, TEMPORARY DRAINAGE INLET PROTECTION, TEMPORARY FIBER ROLL, TEMPORARY SILT FENCE, TEMPORARY CONSTRUCTION ENTRANCE, STREET SWEEPING, TEMPORARY CONCRETE WASHOUT, TREATED WOOD WASTE, CLEARING AND GRUBBING, DUST PALLIATIVE, ROADWAY EXCAVATION, SHOULDER BACKING, WOOD MULCH, ROLLED EROSION CONTROL PRODUCT (NETTING),FINISHING ROADWAY, CLASS 2 AGGREGATE BASE, HOT MIX ASPHALT (TYPE A), DATA CORE, PLACE HOT MIX ASPHALT DIKE (TYPE D), TACK COAT, COLD PLANE ASPHALT CONCRETE PAVEMENT, STRUCTURAL CONCRETE, HEADWALLCY, STRUCTURAL CONCRETE, DRAINAGE INLET, 24" CORRUGATED STEEL PIPE (.109" THICK), 42" CORRUGATED STEEL PIPE (.109" THICK), 48" CORRUGATED STEEL PIPE (.138" THICK), 24" STEEL FLARED END SECTION, REMOVE CULVERT (LF), REMOVE HEADWALL, ROCK SLOPE PROTECTION (150 LB, CLASS III, METHOD B), ROCK SLOPE PROTECTION (20 LB, CLASS I, METHOD B), ROCK SLOPE PROTECTION FABRIC (CLASS 8), MISCELLANEOUS IRON AND STEEL, METAL CATTLE GUARD, REMOVE CATTLE GUARD, FENCE (TYPE BW, METAL POST), DELINEATOR (CLASS 2)EA, PAVEMENT MARKER (RETROREFLECTIVE-RECESSED), MILEPOST MARKER, MARKER (CULVERT), OBJECT MARKER (TYPE L-1), REMOVE ROADSIDE SIGN, FURNISH SINGLE SHEET ALUMINUM SIGN (0.063"-UNFRAMED), ROADSIDE SIGN - ONE POST, RETROREFLECTIVE SHEETING (TYPE XI), CABLE RAILING, THERMOPLASTIC PAVEMENT MARKING, THERMOPLASTIC TRAFFIC STRIPE (SPRAYABLE), MOBILIZATION, all trucking and supply of materials.
Requirements: Knife River Construction is an Equal Opportunity Employer and is signatory to Operating Engineers, Laborers and Teamsters. 100% payment and performance bonds may be required for full amount of subcontractor price. All subcontractors must be licensed and have liability insurance and workers compensation insurance meeting Knife River Construction's requirements. Knife River Construction is willing to assist with obtaining bonding, insurance, equipment and materials and is willing to break down items into economically feasible packages to encourage participation.
Date posted: 08/06/2018
Contractor: Serafix Engineering Contractors, Inc Contact: Estimating Dept
Address: 7 Crow Canyon Court, Suite 250 San Ramon, CA 94583
Phone: 925-552-8253 Fax: 925-552-8254 Email: estimating@secontractors.com
Services needed: Serafix Engineering Contractors, Inc. (SEC) is soliciting quotes from certified DBE Subcontractors and Suppliers for the following categories of work (including but not limited to): LEAD COMPLIANCE PLAN, PREPARE STORM WATER PREVENTION PLAN, ANNUAL REPORT AND SAMPLING ANALYSIS DAY. RAIN EVENT ACTION PLAN. CONSTRUCTION AREA SIGNS, TRAFFIC CONTROL SYSTEM. GUARDRAIL SYSTEM, STRIPING, EROSION CONTROL TEMP. TACK STRAW, TEMP. CHECK DAM. TEMP DRAINAGE INLET PROTECTION, TEMP. FIBER ROLL AND SILT FENCE, SWPPP. CONCRETE WASHOUT, TREATED WOOD WASTE, CLEARING AND GRUBBING, DUST PALLIATIVE, SHOULDER BACKING, WOOD MULCH , NETTING, HYDROSEED, AGGREGATE BASE, HMA, DATA CORE, TACK COAT, COLD PLANE CONCRETE, MISC. IRON AND STEEL, ROCK SLOPE PROTECTION, METAL CATTLE GUARD, PAVEMENT MARKING, THERMOPLASTIC MARKING, ROADWAY EXCAVATION. Work will be broken down to accommodate subcontractor quotes.
Requirements: PLEASE SUBMIT A COPY OF YOUR CURRENT DBE CERTIFICATION WITH YOUR PROPOSAL. SEC adheres to the requirement for Affirmative Action to ensure Equal Employment Opportunity according to Executive Order 11246, and requires proof from all subcontractors that they are in accordance. 100% Performance and Payment Bonds with a surety company thereof, subject to the approval of SEC, will be required of all subcontractors. SEC will pay bond premium up to 1.5%. Please contact SEC for assistance with bonding, insurance, or lines of credit. All subcontractors are expected to sign a standard contract, which can be viewed at our office located at 7 Crow Canyon Court Ste 250 San Ramon, CA 94583. Any bid provided by a Subcontractor constitutes an acceptance on each and every term of the general contractor?s standard contract. Subcontractor will be deemed to understand and accept those terms by providing a bid. Any attempt by a Subcontractor to revise or limit those terms will be null and void and not recognized by SEC. Prevailing wages must be met. Subcontractor must possess current insurance and workers compensation coverage meeting SEC?s insurance requirements. Insurance waiver of subrogation is also required. SEC is a Union Contractor. Any non-signatory subcontractors will be required to sign an agreement for trades covered under our agreements. Plans & specifications are available for downloading from the Caltrans website: http://www.dot.ca.gov/hq/esc/oe/contract_awards_services.html, viewing at our office or at Caltrans Plans Counter. Please contact SEC at 925-552-8253 for additional information or questions.
Date posted: 08/09/2018
Contractor: Hat Creek Construction & Materials, Inc. Contact: Amber DeMarco
Address: 24339 Hwy 89 N. Burney, Ca. 96013
Phone: 530-335-5501 Fax: 530-335-5510 Email: amber@hatcreekconstruction.com
Services needed: Hat Creek Construction & Materials, Inc. is requesting quotes from qualified DVBE/DBE/UDBE/SBE subcontractors and suppliers for the following bid items for this project: 1) LEAD COMPLIANCE PLAN, DEVELOP WATER SUPPLY, CONSTRUCTION AREA SIGNS, TRAFFIC CONTROL SYSTEM, PORTABLE CHANGEABLE MESSAGE SIGN, JOB SITE MANAGEMENT, PREPARE STORM WATER POLLUTION PREVENTION PLAN, RAIN EVENT ACTION PLAN, STORM WATER SAMPLING AND ANALYSIS DAY, STORM WATER ANNUAL REPORT, MOVE-IN/MOVE-OUT (TEMPORARY EROSION CONTROL), TEMPORARY TACKED STRAW, TEMPORARY CHECK DAM, TEMPORARY DRAINAGE INLET PROTECTION, TEMPORARY FIBER ROLL, TEMPORARY SILT FENCE, TEMPORARY CONSTRUCTION ENTRANCE, STREET SWEEPING, TEMPORARY CONCRETE WASHOUT, TREATED WOOD WASTE, CLEARING AND GRUBBING, DUST PALLIATIVE, ROADWAY EXCAVATION, SHOULDER BACKING, WOOD MULCH, ROLLED EROSION CONTROL PRODUCT (NETTING),FINISHING ROADWAY, CLASS 2 AGGREGATE BASE, HOT MIX ASPHALT (TYPE A), DATA CORE, PLACE HOT MIX ASPHALT DIKE (TYPE D), TACK COAT, COLD PLANE ASPHALT CONCRETE PAVEMENT, STRUCTURAL CONCRETE, HEADWALLCY, STRUCTURAL CONCRETE, DRAINAGE INLET, 24" CORRUGATED STEEL PIPE (.109" THICK), 42" CORRUGATED STEEL PIPE (.109" THICK), 48" CORRUGATED STEEL PIPE (.138" THICK), 24" STEEL FLARED END SECTION, REMOVE CULVERT (LF), REMOVE HEADWALL, ROCK SLOPE PROTECTION (150 LB, CLASS III, METHOD B), ROCK SLOPE PROTECTION (20 LB, CLASS I, METHOD B), ROCK SLOPE PROTECTION FABRIC (CLASS 8), MISCELLANEOUS IRON AND STEEL, METAL CATTLE GUARD, REMOVE CATTLE GUARD, FENCE (TYPE BW, METAL POST), DELINEATOR (CLASS 2)EA, PAVEMENT MARKER (RETROREFLECTIVE-RECESSED), MILEPOST MARKER, MARKER (CULVERT), OBJECT MARKER (TYPE L-1), REMOVE ROADSIDE SIGN, FURNISH SINGLE SHEET ALUMINUM SIGN (0.063"-UNFRAMED), ROADSIDE SIGN - ONE POST, RETROREFLECTIVE SHEETING (TYPE XI), CABLE RAILING, THERMOPLASTIC PAVEMENT MARKING, THERMOPLASTIC TRAFFIC STRIPE (SPRAYABLE), MOBILIZATION plans and specifications can be obtained from the Caltrans website http://www.dot.ca.gov/hq/esc/oe/weekly_ads/index.php
Requirements: Subcontractors must possess current contractor?s license, insurance and workers compensation meeting Hat Creek Construction?s requirements. Payment and performance bonds may be required. Subcontractors will be subject to the terms and conditions of Hat Creek?s subcontract agreement and safety standards. If you need assistance in obtaining bonds, insurance, equipment, materials and/or supplies please contact our office or visit our website www.hatcreekconstruction.com for more information. Hat Creek Construction & Materials, Inc. is an equal opportunity employer and intends to work cooperatively with all qualified firms seeking work on this project.
Date posted: 08/13/2018