- Traffic Control Devices
- New Policy & Directives
- California MUTCD
- Sign Specifications
- CA MUTCD Sign Charts
- Contractor-Furnished Signs
- Standard Plans &
Standard Special Provisions
- Work Zone Traffic Control Resources
- Sign Contracts
- Project Information Signs
- Tsunami Signs
- Victims Memorial
- Flagging Instruction Handbook (.pdf)
- North Region Construction
Night Work Guide (.pdf)
- Traffic Manual (CURRENT)
- Other PDF, Misc. Files & Web Links
- REPORT A MISSING
OR DAMAGED SIGN
Victims Memorial Sign Program
The California Department of
Transportation (Caltrans), upon request from an
immediate family member of a person who was killed
by a driver intoxicated with drugs or alcohol,
will place and maintain a sign in memory of the
Caltrans developed the following guidelines for placing victim memorial signs on state highways in accordance with the provisions of Streets and Highways Code Section 101.10.
I. Qualifications for a Memorial Sign
The following conditions must be satisfied to qualify for a memorial sign on a state highway:
A) At least one of the deceased victim's immediate family members requests a memorial sign. An immediate family member is a spouse, child, stepchild, brother, stepbrother, sister, stepsister, mother, stepmother, father or stepfather.
B) The accident occurred on or after January 1, 1991.
C) Either (1) or (2) is true:
(1) The intoxicated driver was convicted of second degree murder, or gross vehicular manslaughter, or vehicular manslaughter.
(2) The intoxicated driver died or could not be prosecuted because of mental incompetence. Note: An intoxicated driver who died does NOT qualify as a victim.
II. Installation of
Memorial Signs on State Highways
The following are requirements for placing memorial signs on state highways:
A) Signs will be installed in accordance with applicable Caltrans policies and standards for signs. This includes posts, hardware, materials, vertical, longitudinal, and lateral positioning.
B) Caltrans will NOT install or maintain a memorial sign if there is written opposition from any immediate family member.
C) Only one sign will be installed in one direction of travel on the right side of the state highway in close proximity to where the accident occurred at a location where it is safe and practical to do so.
D) Caltrans will maintain the sign for 7 years or until the condition of the sign has deteriorated to a point where it is no longer serviceable, whichever occurs first.
E) Only one sign will be installed per accident. Multiple victim names may appear on the sign.
F) A sign will NOT be installed in the median of any state highway.
III. How to Apply
To request a memorial sign please submit items noted in A through D below to the local District Office of Caltrans responsible for the area where the accident occurred. Click here to view the mailing addresses of the District Offices by County.
Once approved, the applicant must pay a fee of $1,000 to the local District Office to cover the cost of administration, installation and maintenance of the memorial sign.
A) An immediate family member of the deceased victim must write to the local Caltrans District Office requesting a memorial sign. Any person may also request a sign if that person also submits written consent from an immediate family member.
|EXAMPLE OF A WRITTEN REQUEST:
Dear District Director,
I [Jane Doe] am requesting and give my consent that a sign be placed on the state highway memorializing my brother [John Doe] in accordance with the Caltrans Victims Memorial Sign Program.
I understand that this request becomes public information, however, my family and I also request that Caltrans please respect our privacy and not release my name or contact information on file with the State of California to persons within the Department, or other interested parties, beyond those staff responsible to process and maintain file information for this sign.
[Jane Doe's signature]
[Return Address and Contact Telephone Number]
[E-mail address if available]
B) The applicant must provide a copy of the accident report to the local Caltrans District Office (This is needed to verify the date and location of the accident). Other equally reliable sources for this information supplied by the applicant will be considered.
C) The applicant must provide proof of conviction to the local Caltrans District Office from court records, or proof of intoxication from coroner's records if the driver died. Other equally reliable sources for this information supplied by the applicant will be considered.
D) The applicant must provide the exact spelling of the deceased victim's name as it is to appear on the memorial sign.
Frequently Asked Questions1) How do I apply for a sign?
By submitting a written request and official documentation to the local Caltrans district office where the accident occurred. Detailed application guidelines are available on the Caltrans web-site or by regular mail upon request.
2) What is official documentation?
Police accident reports are needed to verify the date and location of the accident. Court records are needed to verify conviction for second degree murder, or gross vehicular manslaughter, or vehicular manslaughter. Coroner's records are needed only if the driver died and was not prosecuted to verify the presence of drugs or alcohol.
3) What happens if I cannot obtain accident reports, coroner's or court records?
If incomplete documentation is provided with the request and Caltrans is unable to verify the accident or conviction the sign will NOT be installed. However, other equally reliable sources for this information will be considered, but must be provided by the applicant.
4) How is the sign cost determined?
Typically, here is what the fee covers: Verifying the request, receiving and depositing funds, ordering the sign, determining the exact location of the sign in the field, and conducting an underground utility investigation before drilling the posthole. The sign is fabricated from two sheets of aluminum (36" x 30" and 36" x 12"), which are both mounted on a single wooden post. Once the sign, post and hardware are received, specially equipped crews drive to the location and establish a work zone. The work zone involves setting up temporary construction signs and cones to separate workers from traffic. The posthole is drilled and the sign is installed. Maintenance crews maintain the sign for seven years and replace the sign if it gets knocked down, vandalized or stolen.
5) Can someone other than an immediate family member apply for a memorial sign?
Any person may request a sign if that person also submits written consent from an immediate family member.
6) What happens if another immediate family member objects to the sign?
If the objection is in writing, the sign will NOT be installed or if it has already been installed it will be removed. There is no additional charge for removal. There will be no refund of the original fee once the sign has been installed.
7) Can family, friends, or the general public be present during installation?
Normally, only qualified personnel are allowed in work zones.
8) Can family, friends, or the general public pull over to view the sign or get out of their vehicles?
Motorists cannot park at locations where highway signs explicitly prohibit parking. Otherwise, parked vehicles cannot block the normal flow of traffic or be left standing alongside the highway for extended periods. In the interest of public safety, Caltrans does NOT encourage motorists to park alongside state highways or get out of their vehicles. It is Caltrans' practice to remove wreaths, crosses, flowers, etc. within the state highway right-of-way to prevent these from being motorist distractions.
9) Can a sign be installed on a private, city or county road?
The law specifies installation on state highways. If the accident did not occur on a state highway you may want to contact the appropriate agency that has jurisdiction of the road. Caltrans will only install signs on state highways. State highways are easily identifiable on commercially available road maps of California by distinctive route shields: Interstate (red, white, and blue), State Highway (green and white), or U.S. Highway (black and white).
10) How long will it take to have a sign installed?
It could take up to 90 days. Once the local District office has received all of the required documentation the approval may take 30 days for verification and field investigation. Once approved and the fee is received, it may take another 60 days for ordering, fabrication, delivery and installation of the sign.
11) What happens if the sign gets vandalized, stolen or knocked down?
The initial fee covers the cost of replacing the sign one time.
|District Boundary Map:||District:||Contact Info:|
|P.O. Box 3700
Eureka, CA 95502-3700
Phone: (707) 445-6600
|1657 Riverside Drive
Redding, CA 96001
Phone: (530) 225-3426
|703 B Street
Marysville, CA 95901
Phone: (530) 741-4211
|P. O. Box 23660
Oakland, CA 94623-0660
Phone: (510) 286-4444
|50 Higuera Street
San Luis Obispo, CA 93401-5415
Monterey Pennisula area: (831) 372-0862
Salinas area: (831) 753-0187
San Luis Obispo area: (805) 549-3111
Santa Barbara area: (805) 568-0858
Santa Cruz Area: (831) 423-0396
|1352 W. Olive Avenue
Fresno, CA 93728
Phone: (559) 488-4082 or
(559) 488-4248 or (559) 444-2409
|100 South Main Street, Suite 100
Los Angeles, CA 90012
Phone: (213) 897-3656
|464 W. 4th St.
San Bernardino, CA 92401
Phone: (909) 383-4561
|500 South Main Street
Bishop, CA 93514-3423
Phone: (760) 872-0601
|1976 Charter Way
Stockton, CA 95205
Phone: (209) 948-7543
|4050 Taylor Street
San Diego, CA 92110
Phone: (619) 688-6670
|3347 Michelson Dr., Ste 100
Irvine, CA 92612-8894
Phone: (949) 724-2000