|ROUTE / KP||11-Imp-8-R18.9/R19.5|
|LOCATION||In Imperial County Near Ocotillo From 0.3 Km West To 0.3 Km East Of Imperial Highway Undercrossing.|
|DESCRIPTION||Rehabilitate Ramps And A Portion Of Imperial Highway|
|BID OPENING||01/11/2007 01/25/2007|
|LAST POSTING||01/24/07 @ 18:25|
||AGGREGATE PRODUCTS INC.
||GRANITE CONSTRUCTION CO.
The Caltrans District
Office is located at 2829 Juan Street, San Diego, CA 92110. The mailing
address is P.O. Box 85406, San Diego, CA 92186-5406. The District 11
Senior telephone number is (619) 688-6635. Please submit all inquiries
in the proper format by fax to (619) 688-6988 or e-mail to:
The responses to bidder' inquiries, unless incorporated into a formal addenda to the contract, are not a part of the contract and are provided for the bidder's convenience only. In some instances, the question and answer may represent a summary of the matters discussed rather than a word-for-word recitation. The responses may be considered along with all other information furnished to prospective bidders for the purpose of bidding on the project. The availability or use of information provided in the responses to bidder' inquiries is not to be construed in any way as a waiver of the provisions of Section 2-1.03 of the Standard Specifications or any other provision of the contract, the plans, Standard Specifications or Special Provisions, nor to excuse the contractor from full compliance with those contract requirements. Bidders are cautioned that subsequent responses or contract addenda may affect or vary a response previously given.
Caltrans District 11 Construction Department has developed this method of answering Bidder's Inquiries to better serve the needs of the Contractors who bid on our Projects. Caltrans District 11 Construction Department will post all of the questions submitted by any of the contractors that are registered Planholders for that Contract, but reserves the right to not answer any questions deemed unsatisfactory for public viewing.
The BIDDER'S INQUIRIES & RESPONSES will be updated continuously and all attempts will be made to do the final posting by 15:00 on Wednesday prior to the bid opening.
BIDDER'S INQUIRY SUBMITTAL FORM
|Plan Sheet / Specification
Question= In Addendum #1, the
oil content tolerance was changed to +/- 0.3%. This is much more
stringent than industry standards as well as your own standards.
In fact, this is more stringent than the tolerances in your current
testing method. This variance can be seen by a difference in
personnel running the test. How do you plan to uphold this
specification when there is no real accurate, repeatable test to hold
such tight tolerances?