Listing for all primes seeking assistance with project 06-0T2904. 6 results found.
Contractor: Papich Construction Company Inc Contact: Jason Papich
Address: 398 Sunrise Terrace Arroyo Grande, CA 93420
Phone: 805-473-3016 Fax: 805-473-2217 Email: jpapich@papichconstruction.com
Services needed: We are seeking DBE / DVBE participation from Subcontractors, and Consultants for the following items of work, but not limited to: Traffic Control, Construction Area Signs, PCMS, SWPPP, BMP?s, Demo, Bridge Removal, K-Rail, Cold Plane, Clearing & Grubbing, Roadway Excavation, Class II AB, Import, Export, HMA, Struc Excavation, Struc Backfill, Pile Driving, CIDH, Struc Concrete, Minor Concrete, Rebar, Sign Struc, Roadway Signs, Fencing, Striping, Electrical, Trucking, Aggregates
Requirements: Papich Construction Co. Inc. (PCI) intends to bid as a Prime for this Caltrans contract. We intend to conduct ourselves in good faith and work cooperatively with all qualified firms seeking work on this project. We are willing to break out items of work into economically feasible packages to facilitate DBE participation from certified firms. 100% performance and payment bonds will be required for the full amount of the subcontract price. We will reimburse for bond premium up to 2%. By submitting a price quote to PCI, Subcontractors and Suppliers affirm they have carefully examined ALL the bidding/contract documents/addenda and that from his/her own investigation, they have satisfied themselves as to the scope of the work. Please contact us for any assistance you nay require for this solicitation, including obtaining bonding, insurance, equipment, materials and/or supplies. We are signatory to Operating Engineers and Laborers Unions. Any non-signatory subcontractors will be required to sign a one time agreement for trades covered under our union agreements. All project documents are available at no cost for download on the Caltrans Office Engineer Website. Project documents may also be viewed in our office by appointment. Subcontractors must possess a current contractor?s license, insurance and worker?s compensation coverage meeting project requirements and will be required to sign a standard Subcontract Agreement. If you are interested in providing pricing or if you have any questions about this project, or need any assistance from PCI to facilitate your firms participation on this project, please do not hesitate to contact us. For more information contact Jason Papich at 805-473-3016 or by email at jpapich@papichconstruction.com.
Date posted: 11/05/2018
Contractor: Peterson Chase General Engineering Construction Inc. Contact: Kali Goglanian
Address: 16351 Construction Circle West Irvine, CA 92606
Phone: 949-252-0441 Fax: 949-252-0266 Email: bids@petersonchase.com
Services needed: Peterson-Chase General Engineering Construction, Inc. is requesting quotes from all qualified subcontractors and suppliers including certified DBE firms for the following items of work, including but not limited to: Lead Compliance Plan, Construction Area Signs, Traffic Control System, Channelizer (Surface Mounted), Portable Changeable Message Sign (Ls), Temporary Railing (Type K), Temporary Crash Cushion Module, Prepare Water Pollution Control Program, Move-In/Move-Out (Temporary Erosion Control), Temporary Hydraulic Mulch (Bonded Fiber Matrix), Temporary Drainage Inlet Protection, Temporary Silt Fence, Temporary Concrete Washout, Treated Wood Waste, Clearing And Grubbing (Ls), Roadway Excavation, Roadway Excavation (Type Z-2) (Aerially Deposited Lead), Maintain Existing Planted Areas, Wood Mulch, Check And Test Existing Irrigation Facilities, Operate Existing Irrigation Facilities, Control And Neutral Conductors (Armor-Clad), Riser Sprinkler Assembly (Gear Driven), Riser Sprinkler Assembly, 3/4" Plastic Pipe (Schedule 40) (Supply Line), 1" Plastic Pipe (Schedule 40) (Supply Line), 3" Plastic Pipe (Class 315) (Supply Line), 12" Corrugated High Density Polyethylene Pipe Conduit, 4" Welded Steel Pipe Conduit, Dry Seed (Sqft), Hydromulch, Class 2 Aggregate Base (Cy), Hot Mix Asphalt (Type A), Place Hot Mix Asphalt Dike (Type A), Place Hot Mix Asphalt Dike (Type C), Place Hot Mix Asphalt Dike (Type E), Place Hot Mix Asphalt Dike (Type F), Place Hot Mix Asphalt (Miscellaneous Area), Tack Coat, Remove Asphalt Concrete Dike, 60" Cast-In-Drilled-Hole Concrete Pile (Sign Foundation), Structural Concrete, Drainage Inlet, Furnish Sign Structure (Truss), Install Sign Structure (Truss), Remove Sign Structure (Ea), 18" Reinforced Concrete Pipe, Remove Overside Drain, Slope Paving (Concrete), Slope Paving (Concrete, Textured), Minor Concrete (Curb) (Cy), Minor Concrete (Miscellaneous Construction), Minor Concrete (Textured Paving), Miscellaneous Iron And Steel, Prepare And Paint Concrete, Anti-Graffiti Coating, 4' Chain Link Gate (Type Cl-6), Reconstruct Chain Link Fence, Remove Delineator, Delineator (Class 1), Remove Roadside Sign, Reset Roadside Sign, Relocate Roadside Sign, Furnish Laminated Panel Sign (1"-Type A) For Retroreflective Sheeting (Type Xi), Furnish Laminated Panel Sign (2 1/2" - Type B) For Retroreflective Sheeting (Type Xi), Furnish Single Sheet Aluminum Sign (0.063" - Unframed) For Retroreflective Sheeting (Type Xi), Furnish Single Sheet Aluminum Sign (0.080"-Unframed) For Retroreflective Sheeting (Type Xi), Furnish Single Sheet Aluminum Sign (.080"-Framed) For Retroreflective Sheeting (Type Xi), Retroreflective Sheeting (Type Xi), Roadside Sign - One Post, Roadside Sign - Two Post, Install Roadside Sign (Laminated Wood Box Post), Furnish Laminated Wood Box Post (Type L), Midwest Guardrail System (Steel Post), Vegetation Control (Minor Concrete), Transition Railing (Type Wb-31), End Anchor Assembly (Type Sft), Alternative In-Line Terminal System, Concrete Barrier (Type 60m) Modified, Concrete Barrier (Type 60sd), Remove Guardrail, Remove Crash Cushion (Sand Filled), Maintaining Existing Traffic Management System Elements During Construction, Traffic Monitoring Station System, Modifying Existing Electrical System Please email your quotes to Bids@petersonchase.com
Requirements: Peterson-Chase General Engineering Construction Inc. can assist in payment of a reasonable bond premium. A 100% payment bond and performance bond may be required for the full amount of the subcontract price. Please provide a bond premium rate with your quote. If you have any questions, need assistance in obtaining bonding, lines of credit, insurance, equipment, supplies, materials or related assistance in services, please contact Dick Vogels at our office. Please note that no contractor or subcontractor may be listed on a bid proposal for a public works project (submitted on or after March 1, 2015) unless registered with the Department of Industrial Relations pursuant to Labor Code section 1725.5 [with limited exceptions from this requirement for bid purposes only under Labor Code section 1771.1(a)]. Subcontractors must possess a current contractor?s license, insurance and worker?s compensation coverage meeting Caltrans? requirements and will be required to sign the standard Peterson-Chase GEC., Inc. Subcontract Agreement. Plans and specifications are available to be viewed in our office located at 16351 Construction Circle West, Irvine, CA 92606, between 8:00 AM and 3:00 PM Monday through Friday by appointment or you can send a request for this project and we will send you the specs/plans. Peterson-Chase GEC., Inc. is an equal opportunity employer. We do not discriminate against any qualified employee, applicants for employment, subcontractors or vendors regardless of age, race color, creed, religion, sex, sexual orientation, marital status, national origin, military service disabilities, disable veterans or Vietnam era veteran status. If you need any assistance, please do not hesitate to call our office. Items of work may be broken down into economically feasible packages to encourage participation. Peterson Chase General Engineering Construction, Inc. intends to work cooperatively with all qualified firms seeking work on this project.
Date posted: 11/13/2018
Contractor: Granite Construction Company Contact: Bill Hauff
Address: 2716 Granite Court Fresno, CA 93706
Phone: 559-441-5700 Fax: 559-441-5791 Email: bill.hauff@gcinc.com
Services needed: Granite Construction Company is requesting quotes from all qualified subcontractors and suppliers including certified DBE firms for the following items of work, including but not limited to: Lead Compliance Plan, WPC Plan, Construction Area Signs, Traffic Control, Erosion Control, Guardrail, Roadway Excavation, Landscape/Irrigation, HMA, HMA Dike, Tack Coat, Overhead Sign, Roadside Signs, Underground/Drainage, Minor Concrete, Painting, Anti-Graffiti Coating, Concrete Barrier, Electrical, Trucking, Clearing & Grubbing, Portable CMS, Job site Management. Quotations will be broken down into comparable packages as reasonably necessary. Granite will work with interested subcontractors to identify opportunities to break down items into economically feasible packages. Portions of work can be made available upon request prior to bid date. Please call if any assistance is needed.
Requirements: Plans and specifications are available at your local Builders Exchange and/ or on the CDOT website: http://www.dot.ca.gov/hq/esc/oe/weekly_ads/index.php. They are also available for viewing at our office located at 2716 Granite Court, Fresno CA. Requirements: Granite is signatory to Operating Engineers, Laborers, Teamsters, Cement Masons and Carpenters unions. This will be a prevailing wage job. 100% performance and payment bonds may be required for the full amount of subcontract price. Granite will pay for bond premium up to 1.5%. Subcontractors must possess a current contractor?s license, DIR registration number, insurance and worker?s compensation coverage meeting Granite?s requirements and will be required to sign the standard Granite Subcontract Agreement. A copy of the insurance requirements and agreement can be obtained by contacting the estimator. Granite intends to work cooperatively with all qualified firms seeking work on this project. If you need services and or assistance in obtaining bonds, lines of credit, insurance, necessary equipment, materials and/or supplies, for this project call the Estimator, or contact your local Small Business Development Center Network (http://californiasbdc.org), Minority Business Development Center (www.mbda.gov) or contact the California Southwest Transportation Resource Center (https://www.transportation.gov/osdbu/sw-region-sbtrc). Please call or email if any assistance is needed. Granite Construction Company Is An Equal Opportunity Business Employer
Date posted: 11/15/2018
Contractor: Martin Brothers Construction Contact: Connie Dennis
Address: 8801 Folsom Blvd Suite 260 Sacramento CA 95826
Phone: 916-381-0911 Fax: 916-381-1447 Email: cdennis@martinbrothers.net
Services needed: Martin Brothers Construction is requesting quotes from all qualified subcontractors and suppliers including certified SBE / DBE firms for the following items of work, including but not limited to: LEAD COMPLIANCE PLAN, CONSTRUCTION AREA SIGNS, TRAFFIC CONTROL SYSTEM, CHANNELIZER(SURFACE MOUNTED), PORTABLE CHANGEABLE MESSAGE SIGN, TEMPORARY RAILING(TYPE K), TEMPORARY CRASH CUSHION MODULE, JOB SITE MANAGEMENT, PREPARE WATER POLLUTION CONTROL PROGRAM, MOVE-IN/MOVE-OUT (TEMPORARY EROSION CONTROL), TEMPORARY HYDRAULIC MULCH (BONDED FIBER MATRIX), TEMPORARY DRAINAGE INLET PROTECTION, TEMPORARY SILT FENCE, TEMPORARY CONCRETE WASHOUT, TREATED WOOD WASTE, CLEARING AND GRUBBING, ROADWAY EXCAVATION, ROADWAY EXCAVATION (TYPE Z-2) (AERIALLY DEPOSITED LEAD), MAINTAIN EXISTING PLANTED AREAS, WOOD MULCH, CHECK AND TEST EXISTING IRRIGATION FACILITIES, OPERATE EXISTING IRRIGATION FACILITIES, CONTROL AND NEUTRAL CONDUCTORS (ARMOR-CLAD), RISER SPRINKLER ASSEMBLY (GEAR DRIVEN), RISER SPRINKLER ASSEMBLY, 3/4" PLASTIC PIPE (SCHEDULE 40) (SUPPLY LINE), 1" PLASTIC PIPE (SCHEDULE 40) (SUPPLY LINE), 3" PLASTIC PIPE (CLASS 315) (SUPPLY LINE), 12" CORRUGATED HIGH DENSITY POLYETHYLENE PIPE CONDUIT, 4" WELDED STEEL PIPE CONDUIT, DRY SEED (SQFT), HYDROMULCH, CLASS 2 AGGREGATE BASE (CY), HOT MIX ASPHALT (TYPE A), PLACE HOT MIX ASPHALT DIKE (TYPE A), PLACE HOT MIX ASPHALT DIKE (TYPE C), PLACE HOT MIX ASPHALT DIKE (TYPE E), PLACE HOT MIX ASPHALT DIKE (TYPE F), PLACE HOT MIX ASPHALT (MISCELLANEOUS AREA), TACK COAT, REMOVE ASPHALT CONCRETE DIKE, 60" CAST-IN-DRILLED-HOLE CONCRETE PILE (SIGN FOUNDATION), STRUCTURAL CONCRETE, DRAINAGE INLET, FURNISH SIGN STRUCTURE (TRUSS), INSTALL SIGN STRUCTURE (TRUSS), REMOVE SIGN STRUCTURE (EA), 18" REINFORCED CONCRETE PIPE, REMOVE OVERSIDE DRAIN, SLOPE PAVING (CONCRETE), SLOPE PAVING (CONCRETE, TEXTURED), MINOR CONCRETE(CURB)(CY), MINOR CONCRETE (MISCELLANEOUS CONSTRUCTION), MINOR CONCRETE (TEXTURED PAVING), MISCELLANEOUS IRON AND STEEL, PREPARE AND PAINT CONCRETE, ANTI-GRAFFITI COATING, 4' CHAIN LINK GATE (TYPE CL-6), RECONSTRUCT CHAIN LINK FENCE, REMOVE DELINEATOR, DELINEATOR (CLASS 1), REMOVE ROADSIDE SIGN, RESET ROADSIDE SIGN, RELOCATE ROADSIDE SIGN, FURNISH LAMINATED PANEL SIGN (1"-TYPE A) FOR RETROREFLECTIVE SHEETING (TYPE XI), FURNISH LAMINATED PANEL SIGN (2 1/2" - TYPE B) FOR RETROREFLECTIVE SHEETING (TYPE XI), FURNISH SINGLE SHEET ALUMINUM SIGN (0.063" - UNFRAMED) FOR RETROREFLECTIVE SHEETING (TYPE XI), FURNISH SINGLE SHEET ALUMINUM SIGN (0.080"-UNFRAMED) FOR RETROREFLECTIVE SHEETING (TYPE XI), FURNISH SINGLE SHEET ALUMINUM SIGN (.080"-FRAMED) FOR RETROREFLECTIVE SHEETING (TYPE XI), RETROREFLECTIVE SHEETING (TYPE XI), ROADSIDE SIGN - ONE POST, ROADSIDE SIGN - TWO POST, INSTALL ROADSIDE SIGN (LAMINATED WOOD BOX POST), FURNISH LAMINATED WOOD BOX POST (TYPE L), MIDWEST GUARDRAIL SYSTEM (STEEL POST), VEGETATION CONTROL (MINOR CONCRETE), TRANSITION RAILING (TYPE WB-31), END ANCHOR ASSEMBLY (TYPE SFT), ALTERNATIVE IN-LINE TERMINAL SYSTEM, CONCRETE BARRIER (TYPE 60M) MODIFIED, CONCRETE BARRIER (TYPE 60SD), REMOVE GUARDRAIL, REMOVE CRASH CUSHION (SAND FILLED), MAINTAINING EXISTING TRAFFIC MANAGEMENT SYSTEM ELEMENTS DURING CONSTRUCTION, TRAFFIC MONITORING STATION SYSTEM, MODIFYING EXISTING ELECTRICAL SYSTEM,TRUCKING AND SUPPLIER QUOTES on all Required Materials per Project Plans & Specifications. Quotations will be broken down into comparable packages as reasonably necessary. Martin Brothers will work with interested subcontractors to identify opportunities to break down items into economically feasible packages.
Requirements: Martin Brothers Construction is signatory to Operating Engineers, Cement Masons and Laborers. 100% performance and payment bonds may be required for the full amount of subcontract price. Martin Brothers Construction will pay for bond premium up to 1.5%. Subcontractors must possess a current contractor?s license, insurance and worker?s compensation coverage meeting Martin Brother?s requirements and will be required to sign the standard Martin Brothers Subcontract Agreement. A copy of the insurance requirements and agreement can be obtained by contacting the estimator. Plans and specifications are available for viewing at our office located at 8801 Folsom Blvd Suite 260, Sacramento, CA and on the CDOT website. Please call if you need assistance in obtaining bonding, insurance, equipment, materials and/or supplies. Martin Brothers Construction intends to work cooperatively with all qualified firms seeking work on this project. Martin Brothers Construction is an equal opportunity employer
Date posted: 11/16/2018
Contractor: Dawson-Mauldin LLC. Contact: Sandra Dawson
Address: 1071 E Nebraska Selma CA 93662
Phone: 714-378-1533 Fax: 714-378-1534 Email: sandradawson@dawson-mauldin.com
Services needed: Services needed: Dawson-Mauldin LLC is requesting quotes from all qualified subcontractors and suppliers including certified DBE firms for the following items of work, including but not limited to: Lead Compliance Plan, Construction Area Signs, Traffic Control System, Channelizer (Surface Mounted), Portable Changeable Message Sign (Ls), Temporary Railing (Type K), Temporary Crash Cushion Module, Prepare Water Pollution Control Program, Move-In/Move-Out (Temporary Erosion Control), Temporary Hydraulic Mulch (Bonded Fiber Matrix), Temporary Drainage Inlet Protection, Temporary Silt Fence, Temporary Concrete Washout, Treated Wood Waste, Clearing And Grubbing (Ls), Roadway Excavation, Roadway Excavation (Type Z-2) (Aerially Deposited Lead), Maintain Existing Planted Areas, Wood Mulch, Check And Test Existing Irrigation Facilities, Operate Existing Irrigation Facilities, Control And Neutral Conductors (Armor-Clad), Riser Sprinkler Assembly (Gear Driven), Riser Sprinkler Assembly, 3/4" Plastic Pipe (Schedule 40) (Supply Line), 1" Plastic Pipe (Schedule 40) (Supply Line), 3" Plastic Pipe (Class 315) (Supply Line), 12" Corrugated High Density Polyethylene Pipe Conduit, 4" Welded Steel Pipe Conduit, Dry Seed (Sqft), Hydromulch, Class 2 Aggregate Base (Cy), Hot Mix Asphalt (Type A), Place Hot Mix Asphalt Dike (Type A), Place Hot Mix Asphalt Dike (Type C), Place Hot Mix Asphalt Dike (Type E), Place Hot Mix Asphalt Dike (Type F), Place Hot Mix Asphalt (Miscellaneous Area), Tack Coat, Remove Asphalt Concrete Dike, 60" Cast-In-Drilled-Hole Concrete Pile (Sign Foundation), Structural Concrete, Drainage Inlet, Furnish Sign Structure (Truss), Install Sign Structure (Truss), Remove Sign Structure (Ea), 18" Reinforced Concrete Pipe, Remove Overside Drain, Slope Paving (Concrete), Slope Paving (Concrete, Textured), Minor Concrete (Curb) (Cy), Minor Concrete (Miscellaneous Construction), Minor Concrete (Textured Paving), Miscellaneous Iron And Steel, Prepare And Paint Concrete, Anti-Graffiti Coating, 4' Chain Link Gate (Type Cl-6), Reconstruct Chain Link Fence, Remove Delineator, Delineator (Class 1), Remove Roadside Sign, Reset Roadside Sign, Relocate Roadside Sign, Furnish Laminated Panel Sign (1"-Type A) For Retroreflective Sheeting (Type Xi), Furnish Laminated Panel Sign (2 1/2" - Type B) For Retroreflective Sheeting (Type Xi), Furnish Single Sheet Aluminum Sign (0.063" - Unframed) For Retroreflective Sheeting (Type Xi), Furnish Single Sheet Aluminum Sign (0.080"-Unframed) For Retroreflective Sheeting (Type Xi), Furnish Single Sheet Aluminum Sign (.080"-Framed) For Retroreflective Sheeting (Type Xi), Retroreflective Sheeting (Type Xi), Roadside Sign - One Post, Roadside Sign - Two Post, Install Roadside Sign (Laminated Wood Box Post), Furnish Laminated Wood Box Post (Type L), Midwest Guardrail System (Steel Post), Vegetation Control (Minor Concrete), Transition Railing (Type Wb-31), End Anchor Assembly (Type Sft), Alternative In-Line Terminal System, Concrete Barrier (Type 60m) Modified, Concrete Barrier (Type 60sd), Remove Guardrail, Remove Crash Cushion (Sand Filled), Maintaining Existing Traffic Management System Elements During Construction, Traffic Monitoring Station System, Modifying Existing Electrical System Please email your quotes to sandradawson@dawson-mauldin.com
Requirements: Plans and specifications are available at your local Builders Exchange and/ or on the CDOT website: http://www.dot.ca.gov/hq/esc/oe/weekly_ads/index.php. Requirements: Dawson-Mauldin is signatory to Operating Engineers, Laborers, Cement Masons and Carpenters unions. This will be a prevailing wage job. 100% performance and payment bonds may be required for the full amount of subcontract price. Dawson-Mauldin will pay for bond premium up to 1.5%. Subcontractors must possess a current contractor's license, DIR registration number. A copy of the insurance requirements and agreement can be obtained by contacting the estimator. Dawson-Mauldin intends to work cooperatively with all qualified firms seeking work on this project. If you need services and or assistance in obtaining bonds, lines of credit, insurance, necessary equipment, materials and/or supplies, for this project call the Estimator, or contact your local Small Business Development Center Network (http://californiasbdc.org), Minority Business Development Center (www.mbda.gov) or contact the California Southwest Transportation Resource Center (https://www.transportation.gov/osdbu/sw-region-sbtrc). Please call or email if any assistance is needed. Dawson-Mauldin LLC Is An Equal Opportunity Business Employer
Date posted: 12/06/2018
Contractor: Bush Engineering, Inc. Contact: Andy Brooks
Address: 518 N. Redington St. Hanford, CA 93230
Phone: 559-804-4494 Fax: 559-584-1591 Email: abrooks@bushconstruction.net
Services needed: We are requesting bids from DBE Subcontractors/Suppliers in the following trades: Lead Compliance Plan, Construction Area Signs, Traffic Control System, Channelizer (Surface Mounted), Portable Changeable Message Sign (LS), Temporary Railing (Type K), Temporary Crash Cushion Module, "Prepare Water Pollution Control Program", "Move-In/Move-Out (Temporary Erosion Control)", Temporary Hydraulic Mulch (Bonded Fiber Matrix), Temporary Drainage Inlet Protection, Temporary Silt Fence, Temporary Concrete Washout, Treated Wood Waste, "Roadway Excavation (Type Z-2) (Aerially Deposited Lead)", Maintain Existing Planted Areas, Wood Mulch, "Check And Test Existing Irrigation Facilities", Operate Existing Irrigation Facilities, Control And Neutral Conductors (Armor-Clad), Riser Sprinkler Assembly (Gear Driven), Riser Sprinkler Assembly, 3/4" Plastic Pipe (Schedule 40) (Supply Line), 1" Plastic Pipe (Schedule 40) (Supply Line), 3" Plastic Pipe (Class 315) (Supply Line), 12" Corrugated High Density Polyethylene Pipe Conduit, 4" Welded Steel Pipe Conduit, Dry Seed (Sqft), Hydromulch, Remove Asphalt Concrete Dike, 60" Cast-In-Drilled-Hole Concrete Pile (Sign Foundation), Structural Concrete, Drainage Inlet, Furnish Sign Structure (Truss), Install Sign Structure (Truss), Remove Sign Structure (Ea), 18" Reinforced Concrete Pipe, Remove Overside Drain,Miscellaneous Iron And Steel, Prepare And Paint Concrete, Anti-Graffiti Coating, 4' Chain Link Gate (Type CL-6), Reconstruct Chain Link Fence, Remove Delineator, Delineator (Class 1), Remove Roadside Sign, Reset Roadside Sign, Relocate Roadside Sign, "Furnish Laminated Panel Sign (1"-Type A), For Retroreflective Sheeting (Type XI)", Furnish Laminated Panel Sign (2 1/2" - Type B) For Retroreflective Sheeting (Type XI), "Furnish Single Sheet Aluminum Sign (0.063" - Unframed) For Retroreflective Sheeting (Type XI)", "Furnish Single Sheet Aluminum Sign (0.080"-Unframed) For Retroreflective Sheeting (Type XI)", "Furnish Single Sheet Aluminum Sign (.080"- Framed) For Retroreflective Sheeting (Type XI)", Retroreflective Sheeting (Type XI), Roadside Sign - One Post, Roadside Sign - Two Post, Install Roadside Sign (Laminated Wood Box Post), "Furnish Laminated Wood Box Post (Type L)", Midwest Guardrail System (Steel Post), Vegetation Control (Minor Concrete), Transition Railing (Type Wb-31), End Anchor Assembly (Type Sft), Alternative In-Line Terminal System, Remove Guardrail, Remove Crash Cushion (Sand Filled), Maintaining Existing Traffic Management System Elements During Construction, Traffic Monitoring Station System, and Modifying Existing Electrical System Mobilization.
Requirements: Plans & Specifications may be obtained from your local Builder's Exchange as well as the California Department of Transportation website http://www.dot.ca.gov/des/oe/weekly-ads/specs-ntb.php?c=06-0T2904 100 % Performance and Payment Bonds may be required. Please provide a separate price for bond cost. Bond premium will be paid by Bush Engineering, Inc. Subcontract and Purchase Order forms may be viewed at our office. By submitting a bid, the Subcontractor/Supplier confirms that he has reviewed the appropriate form and consents to execute same without modification, if awarded by Bush Engineering, Inc.
Date posted: 12/07/2018