Listing for all primes seeking assistance with project 03-1G0104. 4 results found.
Contractor: Knife River Construction Contact: Marc Madsen
Address: 1764 Skyway Chico, CA 95928
Phone: 530-891-6555 Fax: 530-894-6220 Email: marc.madsen@kniferiver.com
Services needed: Knife River Construction is requesting quotes from all qualified subcontractors and suppliers including certified DBE firms for the following items of work, including but not limited to: LEAD COMPLIANCE PLAN, CONSTRUCTION AREA SIGNS, TRAFFIC CONTROL SYSTEM, PORTABLE CHANGEABLE MESSAGE SIGN, JOB SITE MANAGEMENT, PREPARE WATER POLLUTION CONTROL PROGRAM, TEMPORARY FIBER ROLL, TEMPORARY CONCRETE WASHOUT, TREATED WOOD WASTE, REMOVE CONCRETE, ROADWAY EXCAVATION, SHOULDER BACKING, CLASS 2 AGGREGATE BASE, CRACK TREATMENT, PREPAVING INERTIAL PROFILER, PREPAVING GRINDING DAY, HOT MIX ASPHALT (TYPE A), MINOR HOT MIX ASPHALT, RUBBERIZED HOT MIX ASPHALT (GAP GRADED), PLACE HOT MIX ASPHALT DIKE (TYPE A), PLACE HOT MIX ASPHALT DIKE (TYPE E), TACK COAT, REMOVE ASPHALT CONCRETE DIKE, COLD PLANE ASPHALT CONCRETE PAVEMENTS, ADJUST MANHOLE TO GRADE, PAVEMENT MARKER (NON-REFLECTIVE), PAVEMENT MARKER (RETROREFLECTIVE), REMOVE ROADSIDE SIGN, REMOVE ROADSIDE SIGN PANEL, RESET ROADSIDE SIGN, FURNISH SINGLE SHEET ALUMINUM (0.080"-UNFRAMED), RETROREFLECTIVE SHEETING(TYPE XI), ROADSIDE SIGN - ONE POST, INSTALL ROADSIDE SIGN PANEL ON EXISTING POST, THERMOPLASTIC PAVEMENT MARKING (ENHANCED WET NIGHT VISIBILITY), THERMOPLASTIC TRAFFIC STRIPE (ENHANCED WET NIGHT VISIBILITY) (BROKEN 12-3), THERMOPLASTIC TRAFFIC STRIPE (ENHANCED WET NIGHT VISIBILITY) (BROKEN 36-12), THERMOPLASTIC TRAFFIC STRIPE (ENHANCED WET NIGHT VISIBILITY), THERMOPLASTIC TRAFFIC STRIPE (ENHANCED WET NIGHT VISIBILITY), THERMOPLASTIC TRAFFIC STRIPE (ENHANCED WET NIGHT VISIBILITY), LIGHTING SYSTEM, MODIFYING EXISTING ELECTRICAL SYSTEM, REMOVING EXISTING ELECTRICAL SYSTEM, AND all trucking and supply of materials.
Requirements: Knife River Construction is an Equal Opportunity Employer and is signatory to Operating Engineers, Laborers and Teamsters. 100% payment and performance bonds may be required for full amount of subcontractor price. All subcontractors must be licensed and have liability insurance and workers compensation insurance meeting Knife River Construction's requirements. Knife River Construction is willing to assist with obtaining bonding, insurance, equipment and materials and is willing to break down items into economically feasible packages to encourage participation.
Date posted: 03/29/2018
Contractor: DeSilva Gates Construction Contact: Jack Shewmaker
Address: 11555 Dublin Blvd., Dublin, CA 94568
Phone: 925-829-9220 Fax: 925-803-4263 Email: dgcestimating@desilvagates.com
Services needed: DeSilva Gates Construction is requesting quotes from all qualified subcontractors and suppliers including certified DBE/SBE firms for the following types of work, including but not limited to: Adjust Manhole, Cold Plane, Construction Area Signs, Crack Treatment, Electrical, Erosion Control, HMA Dike, Prepaving Inertial Profiler, Prepaving Grinding, Roadside Signs, Striping and Pavement Markers, WPCP Prep, Trucking, Sweeping, Water Trucks, Erosion Control Materials, Shoulder Backing Material, Aggregate Base Material, HMA Material, RHMA Material and Tack Coat Material.
Requirements: DeSilva Gates is signatory to Operating Engineers and Laborers unions. 100% performance and payment bonds may be required for the full amount of subcontract price. DeSilva Gates will pay for bond premium up to 2%. Subcontractors must possess current insurance and worker?s compensation coverage meeting DeSilva Gates Construction?s requirements. Subcontractor will be required to sign the standard DeSilva Gates Construction Subcontract Agreement. A copy of the agreement can be obtained from our estimator. Quotations must be valid for the same duration as specified by the Owner for Contract Award. Plans and specifications are available for viewing at our Dublin office. Please call if you need assistance in obtaining bonding, insurance, equipment, materials and/or supplies. DeSilva Gates intends to work cooperatively with all qualified firms seeking work on this project. DeSilva Gates is an equal opportunity employer.
Date posted: 03/29/2018
Contractor: A. Teichert & Son, Inc. dba Teichert Construction Contact: Sean Heraty
Address: 400 Sunrise Avenue, Suite 300 Roseville, CA 95661
Phone: 916-757-6400 Fax: 916-757-6499 Email: SHeraty@teichert.com
Services needed: Request for qualified bids from Subcontractors, Suppliers & Truckers for the following project: Project: Construction on State Highway in Yuba County in and near Marysville from Buchanan Street to 0.1 mile East of Levee Road ? Contract No. 03-1G0104 Bid Date: 4/25/18 @ 2:00 PM Docs & Plans Available from Caltrans http://www.dot.ca.gov/des/oe/weekly-ads/all-adv-projects.php Estimate: $2,060,000 Duration: Not less than 53 Working Days and not more than 75 Working Days Agency Goals: 13% DBE Project Description: Teichert Construction is requesting quotes from all qualified subcontractors and suppliers including certified DBE firms for the following items of work, including but not limited to: all materials, labor and equipment for Construction Area Signs, Traffic Control System, Plane Asphalt Concrete, Roadway Excavation, Erosion Control, Aggregate Base, Asphalt Concrete, Place Asphalt Concrete Dike & Misc., Clean & Seal Pavement Joints ? Rout & Seal Cracks, Object Marking, Metal Beam Guard Railing, Thermoplastic Traffic Striping and Marking, Lighting, Asphalt Supplier (Bulk Item), Guard Railing & Barriers Supplier, LEAD Compliance, SWPPP Planning, Bottom; Transfer; Super; End Dump Trucks, Flat Bed Trucking, Water Truck, Asphalt Oil Tankers and Street Sweeping Truck. Teichert Construction intends to work cooperatively with all qualified firms seeking work on this project, including but not limited to breaking out contract work items into economically feasible units to increase overall DBE participation. Plans and specifications are available from the municipality listed above and the Teichert?s Roseville Estimating office. For assistance obtaining or regarding the plans and specifications, please contact the listed Estimator. 100% Payment and Performance Bonds for subcontractors are required. Teichert will pay bond premium up to 2%. Insurance Waiver of subrogation also required. However, certified DBE's are encouraged to contact Teichert and request assistance if they are unable to meet Teichert's standard bonding or insurance requirements. DBE's also are encouraged to contact Teichert for assistance in obtaining lines of credit, equipment, supplies, materials or related assistance or services. Subcontractor, Supplier and Trucker quotes must be valid, at minimum, for the award period stated in the contract documents. Please note that this is a prevailing wage project and Teichert Construction is Union signatory. Subcontractors will be subject to the terms and conditions of Teichert's subcontract and safety documents available at www.teichert.com/for-subcontractors.cfm. Submission of a bid to Teichert will confirm that you have reviewed and accepted Teichert's subcontract form. Conditions or exceptions in Subcontractor?s quote are expressly rejected unless accepted in writing prior to bid. Subcontractor scopes and supplier quotes are required 24 hours prior to bid. Additional information and or assistance to DBE's available from: *** All Subcontractor Quotes must have the Department of Industrial Relations # to be ACCEPTED ***
Requirements:
Date posted: 04/02/2018
Contractor: Lamon Construction Co, Inc. Contact: Bill Mueller
Address: 871 Von Geldern Way Yuba City, CA 95991
Phone: 530.671.1370 Fax: 530.671.7482 Email: bmueller@lamonconstruction.com
Services needed: Lead Compliance Plan, Construction Area Signs, Traffic Control, PCMS, Job Site Mgmt., WPCP, Temporary Fiber Roll, Temporary Concrete Washout, Treated Wood Waste, Remove Concrete, Roadway Excavation, Shoulder Backing, Class 2 Aggregate Base, Crack Treatment, Prepaving Inertial Profiler, Prepaving Grinding Day, Hot Mix Asphalt, Minor HMA, Rubberized HMA, Place Hot Mix Asphalt Dike, Tack Coat, Cold Plane AC Concrete Pavement, Pavement Markers, Remove/Replace Roadside Signs, Retroreflective Sheeting, Thermoplastic Pavement Marking, Thermoplastic Traffic Striping, Lighting System, Modify Existing Electrical System
Requirements: Payment & Performance Bonds may be required. Bonding assistance is available. Subcontractors are encouraged to contact Lamon Estimating for insurance requirements, plan information, or if any other assistance is needed. Lamon intends to establish delivery schedules that encourage DBE participation
Date posted: 04/02/2018