Office of Roadway Materials Testing
 |
 |
 |
 |
Materials Engineering and Testing Services
Office of Roadway Materials Testing
Lab Procedures
| Number | Title |
|---|---|
| LLP-AC1 | Sample Preparation Design and Testing for LA-710-Long-Life |
| LLP-AC2 | Sample Preparation and Testing for Long Life HMA Pavements Revised procedure for use in District 04 Longlife project and the proposed Bella Diddy project in District 02 |
| TM-UCBPRC 99-2 | Mix Design and Analysis and Structural Design for Full Depth Pavement for I-Route 710 |
| TM-UCB PRC 99-3 | Overlay Design for Cracked Seated Pavement LA 710 |
| LP-1 | Determination of Theoretical Maximum Specific Gravity of Mixtures with Different Asphalt Contents |
| LP-2 | Determination of the Voids in Mineral Aggregate |
| LP-3 | Determination of the Voids Filled with Asphalt |
| LP-4 | Determination of Dust Proportion |
| LP-5 | Liquid Anti-Strip Mix Design |
| LP-6 | Dry Lime on Damp Aggregate Mix Design |
| LP-7 | Lime Slurry Marination Mix Design |
| LP-8 | Method of Test for Determining the Percent of Emulsified Recycling Agent to Use for Cold Recycling of Asphalt Concrete |
| LP-9 | Hot Mix Asphalt (HMA) using up to 15% Reclaimed Asphalt Pavement *EXAMPLE* |
| LP-9 Worksheet | Worksheet for Computing Laboratory Batch Weights for HMA Mixtures Containing RAP |
| LP-10 | Sampling and Testing Crumb Rubber Modifier |
| LP-11 | Rotational Viscosity Measurement of Asphalt Rubber Binder |
| LP-12 | Method for Determining Foaming Characteristics of Hot Bitumen |
All Lab Procedures are in Adobe PDF format.
The Acrobat Reader, which is required to view these documents, can be downloaded directly from Adobe's software site.
The California Department of Transportation publishes the California Test Methods (CTM's). Click on the link to view these test methods.
Please email comments or suggestions about this web page to
METS_webmaster@dot.ca.gov